FLANGE CEILING

Flange Ceiling System Box shaped panels with 16mm wide closed joints that enhance the linear appearance Panels.

FLANGE CEILING

Flange Ceiling System can be supplied in any length up to 6000 mm (i.e. less joints) Absence of dust retention and ease of cleaning make these panels ideal for any application where hygiene is important Optimal acoustic control by using perforated panels with a non-woven textile membrane bonded to the inside face Panels are lightweight yet strong, made from aluminium which can be recycled for the full 100%, requiring very little energy Demountable panels, which allows full access to services and equipment in plenum Panels can also be used for exterior applications Steel carriers and steel panels in combination with a suitable thermal insulating pad make a ceiling that can be used in Marine Applications

Product Specification & Pictures

Metacil flange ceiling system comprises of 84mm/184mm x 12.5 mm panels with 23.9 mm flange roll formed out of metal coils. Panels are fixed on to roll formed carriers 32 mm wide x 39 mm deep out of 0.7 mm Aluminium or 0.5 mm galvanised steel sheet with cutouts to hold the panels in module of 100 / 200 mm at maximum 1.6 m c/c without insulation and at maximum 1.5 m c/c with insulation. Carriers are suspended from the roof or truss by 4 mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at max. 1.3 m c/c. Hangers are fixed to the roof by 'J' hooks and nylon inserts. Panels are factory cut in lengths up to maximum 6 m to suit site dimensions or shop drawings. Edge profiles or wall angles are 24 mm X 24 mm X 0.5 mm thick and match the colour of the panel.

  1. Installing the sideline in the same height
  2. Installing main channel in appreciate space, the normal space is 1 – 1.2m to suspension rod by clip in profile holder.
  3. Suspension rod should be installed according to main channel at a distance of 1.2m centre to centre.
  4. Binding the Carrier with main channel with the help of carrier holder at space 1.2mtr to 1.5mtr.
  5. Pressing the Flange panel to the prongs of c carrier perpendicular to the carrier.
  6. Wearing gloves when installing panel , if figure print or stain remain on the panel , please remove it with warm water and detergent , then dry it.

Testings

Frame & smoke spread Class A (ASTM E84)
Light Reflectance (White) LR1
Stability under humidity Yes
IAQ Friendly Yes
VOCs No
Fiber Content No
Moisture Resistance Excellent
Life Cycle Excellent

 

Subscribe Us

For getting regular updates and new product information please Subscribe us

Mascot

© 2018 Mascot Group. All Rights Reserved | Design by W3Layouts