INTERLOCKING STRIP CEILING

Inter Locking Strip Ceiling Design flexibility: ideal for irregular shaped areas, sloping and curved feature ceilings.

INTERLOCKING STRIP CEILING

Neat closed joints present a smooth uninterrupted appearance. Made to measure: customised panel lengths results in minimal installation time and economy of product due to minimal wastage.. Aluminium or galvalume panels and components: high durability (corrosion resistant), requiring minimal maintenance.. Wide range of pre-finished colours available for wide choice and colour-matching. High colour stability and resistance against scratches and corrosion.Cost effective solution: competitive with most conventional ceiling materials. Ease of installation: time on site is minimised and wet trades are eliminated, reducing disruption to other trades.Lightweight: easily handled on site. Only light loads applied to the building structure. Key Feature is the resistence to wind pressure due to interlocking panel and suitable for exterior ceiling areas specially petrol Pumps and canopies .

Product Specification & Pictures

Metacil Interlocking ceiling system consist of panel 150mm wide x 17mm deep , made out of 0.6mm alluminium alloy3105 or 0.5mm galvanized steel in powder coated / coil coated finish fixed on roll formed carrier made on 0.9mm alluminium or 0.5mm galvanized steel in powder coated black finish 34.5mm wide and 48mm deep with prongs to hold the panel in a module of 150mm , suspended from roof by 4mm dia galvanized steel wire rod hanger with

Testings
Frame & smoke spread Class A (ASTM E84)
Light Reflectance (White) Lr1
Stability under humidity Yes
IAQ Friendly Yes
VOCs No
Fiber Content No
Moisture Resistance Excellent
Life Cycle Excellent

1. Installing the sideline in the same height
2. Installing main channel in appreciate space, the normal space is 1 – 1.2m to suspension rod by clip in profile holder.
3. Suspension rod should be installed according to main channel at a distance of 1.2m centre to centre.
4. Binding the clip in profile with main channel with the help of clip in profile holder at space according to the width of tile .
5. Pressing the two parallel edges of tiles to the clip in profile for proper engagement
6. Wearing gloves when installing panel , if figure print or stain remain on the panel , please remove it with warm water and detergent , then dry it.

 

Subscribe Us

For getting regular updates and new product information please Subscribe us

Mascot

© 2018 Mascot Group. All Rights Reserved | Design by W3Layouts